HENDLEX DURABLE CERAMIC DC60

• Easy and fast application;
• Significantly enhances and deepens the color;
• Smooth, glossy finish with outstanding shine;
• Provides exceptional hydrophobic properties, repelling water and dirt;
• Gives a strong self-cleaning effect, requiring less effort to upkeep the car's cleanliness;
• Protects the surface from environmental impact and scratches;
• Strong chemical resistance.

SURFACE PREPARATION

Properly prepare the surface before applying Hendlex DC60. Instructions to follow to ensure the effectiveness of the product:

The surface should be thoroughly washed, free of grease, contaminants and residues.
If the car is waxed, the wax must be removed before applying the coating. Hendlex wax remover is recommended.
For best results, it is highly recommended to polish the car to eliminate scratches, vortices or holograms. Make sure the surface is completely dry. It is recommended to use Hendlex Paint Prepare before applying the coating.

APPLICATION

1. Facing the car, spray the coating on the microfiber cloth.
2. Spread the coating evenly until the surface is completely covered with a uniform wet layer. It is recommended to work in small sections.
3. Allow the coating to harden for 1 minute or until the uniform layer of coating begins to turn into scattered droplets.
4. Polish the surface with the microfiber cloth until any excess coating is wiped off.
5. Wipe the coated area with a clean part of the microfiber cloth for a perfect finish.
6. Recommended coating curing period:
– if the temperature is above +20 °C – 12 initial hours;
– if the temperature is below +20 °C – 24 hours initially.
Do not wash the car for at least 7 days.

Note: After coating the car, turn the bottle upside down and clean the included sprayer by spraying the remaining coating. Store with the original bottle cap.

COVERED AREA

50-70 ml for a medium-sized car.

WARNING!

Do not apply coating to matte surfaces or direct sunlight.
Appropriate application temperature range: +10 °C to +25 °C.
Do not coat if the temperature is above +30 °C.
Once the coating is complete, polish it with a microfiber cloth.
Make sure there are no unpolished stains left.