Subscribe to our

Shop Online

CERAMIC SHIELD M3X 40 ml

Name: CERAMIC SHIELD M3X 40 ml
SKU: 00321
Price: 4300.0 EGP
Availability: InStock

Store / Nano Ceramic & Graphene / Hendlex

EGP4,300.00

In stock

Product Details

Hendlex M3X ceramic coating is new formula of M3 nano ceramic with enhanced properties and with environmentally safe solvent.

The innovative ceramic coating for vehicle body features a more substantial colour-highlighting effect. Because the vehicle’s surface gets slippery, it does not attract grease, water, and dust. The ceramic coating M3X is highly hydrophobic, has 9H hardness and is sturdy and outstandingly durable, which ensures longevity. The updated product version of Hendlex M3 nano-coating provides a better gloss effect for the car body, also protects the car body from adverse environmental impacts, such as acids, alkalis, road salts and UV rays.

Package contents:

Ceramic coating Hendlex M3X (40 ml)

Microfiber cloth (1 pc.)

Coating applicator

Application cloth

Gloves (1 pair)

Application manual

Properties:

Easy application;
Enhances surface hardness;
Smoothens minor scratches and removes the holograms;
Provides applied area an “easy to clean” effect and strong hydrophobic properties, resulting in the surface remaining clean for a longer period of time;
Strongly highlights the finish of surface, bringing out a greater shine; Higher gloss effect;
Provides applied area a high slip effect. Does not attract dust;
Protects the surface from environmental impact including: acids, alkalis (resistant to pH 3-12), road salts, UV rays;
Environmentally friendly solvent.

PREPARATION OF SURFACE :

Adequately prepare the surface before application of Hendlex M3. Guidelines to follow to ensure the effectiveness of the product:

The surface must be washed thoroughly, free of any grease, contaminants, and residue.
Prior coatings or waxes should be removed. Hendlex Wax Remover is recommended.
Highly recommended to polish the car to remove any scratches, swirls, or holograms.
Ensure the surface is completely dry.

Note: it is recommended to use Hendlex Paint Prepare before applying coating for best results.

USAGE :

1. Handle the applicator by the base. Place the application cloth on the soft part of the applicator, tightening it into cutouts on both sides.

*For smaller areas it is recommended to solely use the application cloth without using the applicator.

2. Open the bottle and wet the application cloth entirely. Throughout the process of coating, keep the application cloth wet by applying additional 5-6 drops.

3. Coat the surface evenly in criss-cross motion. Do not use circular movements for product coating. Coat one panel at the time. Try to coat from edge to edge to avoid coating layering marks. Make sure there are no uncovered spots left.

4. After applying coating, wait for:

– if temperature is lower than +24 °C – 3 minutes;

– if temperature is higher than +24 °C – 1 minute;

– do not coat if temperature is more than +30 °C.

5. Polish the surface with the high quality microfiber cloth. Make sure there are no unpolished spots left.

6. Recommended coating curing period:

– if the temperature is higher than +22°C – 12 hours initial;

– if the temperature is +20°C – 24 hours initial.

Do not wash the car for at least 7 days. Depending on the environment temperature, the coating fully hardens in 7 days.

CAUTION!

Do not apply the coating on matte surfaces or direct sunlight.

Proper application temperature range: +10 °C to +25 °C.

Do not coat if temperature is more than +30 °C.

Upon finishing applying the coating, polish it by using microfiber cloth.

Ensure there are no spots left unpolished.

COVERED AREA:

40 ml for one mid-size car for two layers application.

Hendlex M3X ceramic coating

Hendlex M3X ceramic coating usage

Save this product for later