Subscribe to our

Shop Online

+10

CERAMIC SHIELD M3 40 ml

Name: CERAMIC SHIELD M3 40 ml
Brand: Hendlex
SKU: 00238
Price: 4000.0 EGP
Availability: InStock

Store / Nano Ceramic & Graphene / Hendlex

EGP4,000.00

In stock

Product Details

Brand: Hendlex

HENDLEX Car Body Shield M3 is especially sturdy durable nano ceramic protective coating designed for cars and motorcycles.

This coating can be applied on painted and varnished surfaces, plastics or metals. It can be applied as a single layer or multilayer coating.

M3 nano coating is 9H hardness and long lasting protective coating for car body.

PACKED UNDER INERT GAS. Guarantee 100% effectiveness.

PROPERTIES:

Enhances surface hardness;
Smoothens minor scratches and removes the holograms;
Provides the surface with strong hydrophobic properties and with “easy to clean effect”. Water contact angle is 110°, therefore the surface remains clean longer;

Significantly highlights the paint color and provides it with greater shine. Does not attract dust;

Protects the surface from environmental impact: acids, alkalis (resistant to pH2-pH13), road salts and UV rays. It also protects the surface from aging and provides it with additional protection from corrosion;

The coating is resistant to the temperature range from -30 °C to +150 °C.

SURFACE PREPARATION:

If car is waxed, remove wax with HENDLEX Wax Remover. Wash the car carefully and make sure there are no washing products (shampoo, dirt solvent) left on the surface.

For better result it is recommended to coat polished car surface. After polishing make sure to wash the car. It is recommended to remove the remaining water using the compressed air jet.

It is also recommended to remove dirt, oil and fingerprints with HENDLEX Paint Prepare.

USAGE:

The proper temperature for coating is from +10 °C to +25 °C. Cover the surface evenly and make sure that you did not leave uncovered spots.

If the temperature is lower than +20 °C the surface must be polished in 2-3 minutes after coverage.

If the temperature is higher than +24 °C the surface must be polished within 60 seconds after coating application. If the surface gets into contact with water, immediately clean it and repeat the coating process.

CAUTION!

Recommended coating curing period:

if the temperature is higher than +22°C – 12 hours initial;
if the temperature is +20°C – 24 hours initial;
if the temperature is less than +18°C – need to use IR lamps (+60°C - +80°C) for at least 1 hour.

Do not wash the car for 7 days. Depending on the environment temperature, the coating fully hardens in 7 days.

COVERED AREA

40 ml for one mid-size car for two layers application.

HENDLEX Ceramic Shield M3

Usage of Hendlex Ceramic Shield M3