Shop Online
CERAMIC COAT FS60 40 ml
HENDLEX CERAMIC COAT FS60
- Enhances surface hardness;
- Smoothens minor scratches and removes holograms;
- Provides surface strong hydrophobic properties and “easy to clean” effect. Water contact angle is 103°, therefore the surface remains clean;
- Significantly highlightspaint color and provides it with greater shine. Does not attract dust;
- Protects the surface from environmental impact: acids, alkalis, road salts and UV rays. It also protects the surface from aging and provides it with additional protection from corrosion;
- The coating is resistant to temperature range from -30 °C to +150 °C.
If car is waxed, remove wax with HENDLEX Wax Remover. Wash the car carefully and make sure there are no washing products (shampoos, dirt, solvents) left on the surface.
For better result it is recommended to coat polished car surface. After polishing make sure to wash the car. It is recommended to remove the remaining water using the compressed air jet.
It is also recommended to clean the surface with HENDLEX Paint Prepare.
Proper temperature for coating is from +10 °C to +25 °C. It is recommended to cover the area of 1×1 m at the time. If the temperature is higher than +20 °C, cover the smaller area. Cover no more than 1 m 2 with one nonwoven fiber cloth. The surface must be polished in 60 seconds after coverage because it hardens very quickly. If the surface gets into contact with water, immediately clean it and repeat the coating.
Recommended coating curing period:
- if the temperature is higher than +22°C – 12 hours initial;
- if the temperature is +20°C – 24 hours initial;
- if the temperature is less than +18°C – need to use IR lamps (+60°C – +80°C) for at least 1 hour.
Do not wash the car for 7 days. Depending on the environment temperature, the coating fully hardens in 7 days.